1410

Platinum MAC System

 


CaCl2 Max.
10 lbs
RH Max.
90%
pH Range
Up to 13-14
   
 
Taylor 1410 Platinum MAC System is a one coat, solvent free, water-based two component epoxy system containing a unique combination of epoxy resins and other chemical substances, specifically designed for reduction of moisture vapor transmission and alkalinity in concrete floors. It is specially formulated to overcome poor long term adhesion properties of adhesive systems when curing in an environment of constant wetness, extreme alkalinity (pH 13-14) and water vapor drive. Taylor 1410 Platinum MAC System will provide moisture vapor reduction of up to 80% when tested according to ASTM E-96-95, wet method, or reduction from 10 lbs. to 3 lbs. per 1000 square feet per 24 hours as measured by an anhydrous calcium chloride test to ASTM F-1869 test method. Taylor 1410 Platinum MAC System is specially formulated and warranted for use with approved W.F. Taylor adhesive products only and is GreenGuard certified to meet stringent indoor air quality standards for low VOC emissions. Taylor 1410 Platinum MAC System provides an excellent barrier coating with long term protection from moisture or alkali related adhesive bond failures and is warranted for this purpose for 10 years. Taylor 410 Platinum MAC System is intended solely for use on new concrete under 18-months old that has had no previous floor covering applied to it. Consult W.F. Taylor if concrete is over 18-months old and/or has received previous floor coverings.

Contact Us Locate a Sales Rep

Product Usage Guide

Enter Square Footage for your project to find out Trowel Recommendation and Gallons estimation:

 

Please be sure to allow for possible waste.
468 ad

Goto this page directly: