Taylor Encap 500 Adhesive Encapsulator is a multi-functional two-component, solvent-free, water based epoxy barrier coating specifically engineered for use as an adhesive encapsulator over pre-existing adhesive residue. Taylor Encap 500 provides an excellent barrier coating over residue from cutback adhesives, multi-purpose adhesives, and pressure sensitive adhesives, with long term water and humidity resistance, as well as good solvent, chemical and corrosion resistance.
Taylor Encap 500 will provide adhesion to damp concrete and has a rapid room temperature cure. It is specifically recommended for use where new vinyl back floorcoverings are being installed, to prevent plasticizers in the vinyl back materials from reactivating or further plasticizing the pre-existing adhesive indicated above. Taylor 500 may also be used as a concrete floor sealer for sealing against dust and porosity, preventing over-absorption of newly applied adhesive into the subfloor.
Taylor Encap 500 is intended as a barrier coating prior to installation of new flooring and is not intended as a stand alone final floor covering.
