Cove Base & Ceramic Adhesives

1N-C

1N-C

Touchdown 1N-C Special Purpose Contact Cement (VOC Compliant) is formulated to bond large smooth surfaces such as Formica to wood or particle board. Metal, plastic, rubber and wood veneer skins can be laminated to almost any smooth surface. Touchdown 1N-C will not dry out and become brittle with age. Use when a permanent bond is desired. Do not use on vinyl plastic. NON-PHOTO-CHEMICALLY REACTIVE...

Read More

1N

1N

Touchdown 1N Contact Cement is formulated to bond large smooth surfaces such as Formica to wood or particle board. Metal, plastic, rubber and wood veneer skins can be laminated to almost any smooth surface. Touchdown 1N will not dry out and become brittle with age. Use when a permanent bond is desired. Do not use on vinyl plastic. Do not use on copper or brass or alloys of these metals....

Read More

9

9

Taylor Touchdown #9 Adhesive Remover/Stripper is a specially formulated low odor solvent, used to remove wet and cured adhesive from floor covering products and installation tools. Caution: combustible liquid. For industrial and professional use...

Read More

2040

2040

Taylor 2040 is an off-white, hard-setting, acrylic adhesive formulated for the installation of rubber and vinyl cove base over wood, concrete, brick, plaster, wallboard or other porous surfaces. Exhibits fast tack and wet suction to hold on inner and outer corners. Will not contribute to staining, shrinkage or plasticizer migration. Note: Do not apply over non-porous surfaces such as vinyl wall...

Read More

901

901

Odyssey 901 is a non-slip high performance, smooth spreading mastic formulated for interior installation of all types of ceramic wall and floor tile on vertical and horizontal surfaces. This product is non-flammable, freeze-thaw stable to 10ºF, and exceeds ANSI-A-136.1 Type 1 specification on organic adhesive for the installation of ceramic tile. Organic mastics are not recommended for exterior...

Read More

Goto this page directly: